draw grid lines and coordinates in civil 3d 2019

CadTools , complimentary 3D and surface utility for AutoCad, ZWCAD 2018-2021 and BricsCAD

Design your civil work in real 3D with this handy tool!

Latest update:
20 22 -02-08 Build 751

CadTools (ToolBox) is developed for Civil Engineers using AutoCAD. There are a number of great software on the market supporting the design procedure of roads, rails etc. For modest design work CadTools can be very useful, it contains more than 50 commands mostly in existent 3D to support your work.

Past combining separate commands through the work process you can achieve nigh annihilation you want. When I adult the commands I certainly had some situations in mind but every command tin can exist used in a diverseness of situations not only in civil work design.

With CadTools you tin create your own surface models based on objects in the drawing or import triangles from DWG (other ceremonious software). You tin can create profiles and cross-sections of multiple surfaces, calculate volumes and plot contours.
It's easy and fun creating real 3D models with CadTools commands, some of these commands tin only be found in software that y'all have to pay money for.
I
piece of work equally a civil designer at one of Sweden's leading consulting companies. Thousandy main tool for civil blueprint is Bentley InRoads/RailTrack, one of the best software I've seen. Sometimes you need something less complicated so I started developing CadTools while traveling to work by railroad train.

After more v years and thousands of hours of developing this software at present is a powerful tool way beyond my first intentions. Honestly I can't be without information technology, hope you lot volition feel the same.



CadTools is an out of procedure software and supports AutoCAD versions: 2001-20 22
. (vanilla and verticals i.e. Ceremonious 3D). Information technology also supports ZWCAD+ (2014-2015 and 2018-2022) and BricsCAD




Major C
ommands in CadTools are listed beneath. CadTools has a consummate helpfile with images of command results.

Text
Insert or remove characters to single line text.
Align text to UCS and scale it.
Align Text to Left.
Send selected text to Excel

Line Aligned Text
Capitalize/Uncapitalize text

Lines
Surface area calculation of polylines based on colour or layer. Results tin be exported to Excel
Export polyline coordinates to Excel
Length calculate of polylines based on color or layer. Results can be exported to Excel
Reverse polyline
Signal section and offset from polyline
Describe slopemarks from polylines

Starting time 3DPolylines
Create cylinders (pipes) from polylines/lines.
Profile 3DPolyline
Create route signs and markings
Level out 3Dpolyline
Transverse 3D lines between 3D Polylines (3D Slope signs)

Bring together 3D Polylines
Draw Slope Arrows for 3Dpolylines (Ditch bottom slope management)
Stationing Polyline
Line Aligned Text
Edit Polyline Elevation
and slope (In table )
Create 3D alignment from plan and profile
All-time fit, 3D-polyline regression.
Simplify command for 3D-polylines
Set polyline elevation past nearest text, fixes contours with no elevation just text!

Lines/Polylines to EPANET INP-file

Layers

All layers on
All layers off only selected

All layers off but electric current
Layer off by object
Xref layer freeze by unmarried object
Motion to layer by object
Fix electric current layer by object
Delete layer

Describe
Draw polylines, circles and blocks from coordinates. Paste from Excel to CadTools

Surface
Generate longitudinal features (ditch bottom, surface interception) with cutting/fill tick marks.
Import Triangulated Surface from Graphic (from other software)
Triangle Book and color cut/fill areas in program.

Triangulate objects (create surface models)

Curtain surface with objects and lines
Pick and annotate elevation from surface
Create wireframe surface
Cutting & Fill up areas in cantankerous-sections
Create Surface Profiles
Create Surface Cross Section
View Surface Slope and Directio
due north
View Perimeter for flat (or any slope interval) Surface Areas
Option and comment Slope vector from surface
Constrained triangulation (breaklines)
Surface Contours
Trickle, traces the path of a drop of water downwardly a selected surface.
Volume by Elevation, triangle volumes at intervals
Trickle All, evaluate surface h2o paths.

Convert
Convert 3DPolylines to 2Dpolylines
Convert 3DFaces to 3Dpolylines
Convert arc to 3Dpolyline
Create coordinate filigree
Place sloped text
Convert Circle to 3Dpolyline

Xref
Open Xref by Object
Disassemble Xref by Object
Salvage/Load Xref-settings to/from file Cake
Edit cake attribute text
Annotate block elevation
Drainage network evaluation, evaluation of block (manholes) and Lines (pipes). Issue in Excel
Consign cake information to Excel (coordinates, attribute values) Hatch

Export Hatch area to Excel Miscellaneous
Vehicle Turning Simulation (Vehicle Tracking)

Drafting
Annotate Profiles/Cantankerous sections


Vehicle Turning Simulation (Swept path analysis). Configure vehicles of your ain and do analysis in the cartoon. Much faster design than using turning templates.

Create surface cross-sections equally 2D or 3D . Brandish crossing reference lines


Surface Contours



View Surface gradient and direction.
Easily notice flat areas.
Perimeter of areas with userdefined slopes.


Create real 3D cut and make full by applying end-conditions to 3Dpolylines.
Very simple and powerful step by step process.



Create Requite Mode


Create Chevrons



Limitations:

CadTools does not work with AutoCadLT
. Some features are limited for unregistered users.

Windows Vista users!
Problems running CadTools? Probably it's Vista'south UAC dabbling, try to launch CadTools as an Administrator. Simply find the shortcut for CadTools, correct click on it and then in the Compatibility tab select the option that say: Run this program as an Administrator.

If yous are using Bricscad yous will find the Vehicle Turning in
BricsTurn . The Vehicle Turning is also available as a freeware for Microstation V8. MSTurn
Downloads
Download (MSI-file, ca 7,ii Mb), Last updated 202 two -02-08 Build 75 1
Alternative download (ca
13,v Mb Zip-file containing consummate installation and update plus reference manual)
Update for CadTools (ca
3,8 Mb), Concluding updated 202 two - 02-08 Build 7 51
Download update only. If you already installed CadTools and but need the update, use
this link . Boosted downloads

Reference Manual English (ca 2,six Mb) (PDF certificate, printed documentation 112 pages, updated 2014-06-xx)
Reference Manual Italian (Translated by Gennaro Bellaiuto)
Video Samples (Collection of video demonstrations)
Default Vehicle library (metric) Vehicle samples in metric units
Default Vehicle library (imperial, 2013-05-13) Vehicle samples in regal units

Portable version of Build 7

48
CadToolsPortable (ca 47 Mb) Run CadTools from a USB stick (Virtualized)

CadTools Forum


Online give-and-take site for CadTools.

How much should I donate? There is no right respond to that, the upshot is always the same no affair how much or little you lot donate.
Received donations are used for paying Server, Domain and Software fees.


Please annotation that donation notifications are sent to me from PayPal by email and I manually send you a registration e-mail equally soon as possible.
Generally I respond same twenty-four hour period.
If you haven't received a responding electronic mail in a couple of days, check your spam filter or mail service a message to me in CadTools forum.
lars.karlsson@glamsen.se


Latest update ( twenty22-02 -08 Build 751 )
Bugfix: Exporting MText to Excel resulted in missing graphic symbol (terminal character)

Update ( 2021-10 -30 Build 750 )
Bugfix: View Surface Gradient Direction, when using a scale gene arrows pointing in wrong direction (upwards)
Added: User setting for number of decimal places for contour annotations (Surface Contours command)

U pdate ( twenty21-09 -12 Build 7four 9 )
Option to plot cross-sections in reverse direction .

Update ( 2021-08 -09 Build seven4 8 )
Added support for AutoCAD 2022 and BricsCAD .

Update ( xx21-07 -10 Build 7iv 7 )
Changed behavior of annotation offset parameter in stationing command, cipher offset now put the annotation text (insertion signal) aligned to the alignment.

Update ( xx21-06- 22 Build 74 six )
F ixed bug while exporting to SpreadSheet (Lines/Area/Cake/volume). This is only when you don't accept Excel installed

Update ( 202 1 -05- 3 ane Build 7four 5 )
Added back up for AutoCAD 2022

Update ( 2020-12- 11 Build 74 4 )
CadTools internal Spread Canvas had problems with copying. Re-create All worked but non Copy Selected. This is at present fixed.

Update ( 2020-12- 03 Build 74 3 )
The preview window in "Create Longitudinal Features" didn't evidence up.

Update ( 20twenty-11- 24 Build 74 2 )
Exporting to spreadsheet with setting "Excel is non installed on this computer" did not showed CadTools internal SpreadSheet.

Update ( twenty20-11- 06 Build seven4 1 )
Added support for ZWCAD 2021

Update ( 20xx-10- two 7 Build 7xl )
Stock-still a commitment bug in previous update, I missed to exclude test lawmaking.

Update ( 2020-10- 26 Build 739 )
Extended "Describe from Coordinates" with "Multiple Block insert" type and Layer overrides for blazon "Text at Indicate"



Revision History

schumanwhimen1991.blogspot.com

Source: https://www.glamsen.se/CadTools.htm

0 Response to "draw grid lines and coordinates in civil 3d 2019"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel